Stainless Steel Sheet Sizes Chart (Standard Sizes in India)
Introduction
It is always vital that the right stainless steel sheet sizes chart be selected in order to ensure good fabrication, construction, industrial manufacturing and engineering projects are produced. Knowledge of the stainless steel sheet sizes chart benefits the purchaser in ensuring there is minimum wastage of the material and the correct material cutting, as well as providing an accurate indication of the cost.
There are several types and sizes of stainless steel sheet and each type differs depending on whether you require it with a thickness, grade or finish. Whether it is SS 202, SS 304, or SS 316 sheets, the right size of the steel sheet needs to be chosen for good fabrication and to avoid errors in the costing of a project.
It is also worth noting that if you are also estimating the weight of steel sheets that you require, you should consult our stainless steel sheet weight chart, where we calculate the weight based on their size and thickness.
What Is a Stainless Steel Sheet?
A stainless steel sheet is a flat-rolled metal that is produced from corrosion-resistant stainless steel alloys. They are commonly used in:
- Construction
- Food processing
- Pharmaceuticals
- Chemical plants
- Architectural projects
- Industrial fabrication
They are produced in various grades, finishes and dimensions depending on the requirements.
Why Stainless Steel Sheet Sizes Matter
Knowing the typical sizes of sheet material allows buyers to:
- Reduce material waste
- Speed up fabrication
- Lower cutting costs
- Easy transport
- Assist in planning project schedules
The correct sheet size has a definite influence on the costs associated with industrial projects.
Standard Stainless Steel Sheet Sizes Chart in India
| Size (MM) | Size (Feet) |
|---|---|
| 1220 × 2440 | 4 × 8 |
| 1220 × 3050 | 4 × 10 |
| 1500 × 3000 | 5 × 10 |
| 1525 × 3050 | 5 × 10 |
| 2000 × 4000 | 6.5 × 13 |
| 2500 × 6000 | 8 × 20 |
Most Popular Sheet Size
The most popular stainless steel sheet size is:
1220 2440 mm (4 8 feet)
This size is readily applicable to fabrication, kitchen equipment, architectural jobs, and industrial endeavours.
Common Stainless Steel Sheet Thicknesses
Multiple thickness options are available for our stainless steel sheets.
Thin Stainless Steel Sheets
Thickness options:
- 0.3mm
- 0.4mm
- 0.5mm
- 0.6mm
- 0.8mm.
Uses:
- Decorative panels
- interiors of elevators
- kitchens.
Medium Thickness Sheets
Thickness options:
- 1mm
- 1.2mm
- 1.5mm
- 2mm
- 3mm.
Uses:
- General fabrication
- pharmaceutical machinery
- food machinery.
Heavy Thickness Sheets
Thickness options:
- 4mm
- 5mm
- 6mm
- 8mm
- 10mm
- 12mm.
Uses:
- Industrial fabrication
- structural work
- tanks and vessels.
Stainless Steel Sheet Thickness Chart
| Thickness |
|---|
| 0.5 mm |
| 0.8 mm |
| 1 mm |
| 1.2 mm |
| 1.5 mm |
| 2 mm |
| 3 mm |
| 4 mm |
| 5 mm |
| 6 mm |
| 8 mm |
| 10 mm |
| 12 mm |
For weight calculations based on thickness and dimensions, check our SS sheet weight calculation guide.
Popular Stainless Steel Grades Available
SS 202 Sheets
SS 202 are the most economical stainless steel sheet widely used for indoor purposes and fabrication activities.
Application:
- Furniture
- Decorative use
- Interior fabrication
SS 304 Sheets
SS 304 are the most commonly used grade of stainless steel sheets due to its immense corrosion resistance capacity and endurance.
Consider the latest SS 304 sheet price per kg in Ahmedabad, if you are intending for an order.
Application:
- Food industry
- Pharmaceutical use
- Industrial fabrication
SS 316 Sheets
SS 316 have excellent corrosion resistance, since they consist of molybdenum.
Application:
- Marine industry
- Chemical processing plant
- Water treatment facility
Compare the available SS 316 sheet selections before placing an order for industrial projects where corrosion resistance is more needed.
Available Stainless Steel Sheet Finishes
2B Finish
The standard industrial finish
Application:
• Fabrication
• Industrial equipment
No.4 Finish
Brushed finish, best used for decorative applications.
Application:
• Elevators
• Commercial kitchen
• Architectural panels
Mirror Finish
Very reflective surface.
Application:
• Interior design
• Architectural work
Hairline finish
Linear textured finish, suitable for modern architecture.
Matt finish
Dull, non-gloss finish for industrial and commercial applications.
Stainless Steel Sheet Weight Calculation
Knowledge of weights is essential before large orders.
Weight formula
Weight (Kg) = Length x Width x Thickness x Density
The average density of stainless steel is:
7.93 g/cm
Refer to our Stainless Steel sheet weight chart for easy sheet weight calculations.
Sheet Size:
1220 x 2440 mm
Thickness:
1 mm
Approximate weight:
23.6 kg
How to Select the Right Stainless Steel Sheet Size
According to Application
Various applications call for various dimensions.
Example:
- Kitchen appliances- 4 x8 sheets
- Industrial tanks- bigger sheets
- Architectural cladding- long sheets
H3: According to Thickness
The thinner the sheets, the better for decoration and the thicker the sheets, the better for structural and industrial purposes.
According to Grade
Not sure which grade to choose?
Read our in-depth stainless steel grade guide where SS 202, SS 304, SS 316, Duplex and other stainless steel grades are compared.
Industries Using Stainless Steel Sheets
Construction industry
Applications include:
- Cladding
- Roofing
- Railings
- Building facades
Food Processing Industry
Applications include:
- Processing equipment
- storage tanks
- workstations
Pharmaceutical Industry
Used in:
- Clean rooms
- manufacturing equipment
Chemical Industry
Used in:
- Tanks
- pipelines
- pressure vessels
Automotive industry
Used for:
- Vehicle components
- exhaust systems
- structural parts
Related Stainless Steel Products
The use of piping and tubes also falls under several of our applications.
We, as a preferred and dominant stainless steel pipes and tubes supplier in Ahmedabad, provide welded and seamless stainless steel piping systems.
If you’re making an order of piping components, educate yourself on the fundamental differences between seamless and welded stainless steel pipes prior to purchase.
Advantages of Stainless Steel Sheets
Superb Corrosion resistance
With long-life protection against oxidation and rusting.
Highly Resistant
Ideal for the rigours of industrial applications.
Hygienic Surface
Easy to clean and sanitise.
Good Visual appearance
Perfect for aesthetic and architectural applications.
Durable
Good long-term value.
Eco-Friendly
Is 100% recyclable.
Frequently Asked Questions
Q.1. What is the normal size of a stainless steel sheet in India?
Normally 1220 2440 mm (4 x8 feet).
Q.2. Which Stainless Steel Grade is most popular?
The most used grade is SS 304. It possesses good corrosion resistance and is very flexible for applications.
Q.3.Can we cut the stainless steel sheets according to our size requirements?
Yes, they are readily available cut to size service.
Q.4. Which grade is recommended for the sea environment?
It is recommended for the sea environment to use SS 316 grade.
Q.5. How to calculate the weight of a stainless steel sheet?
You may use the formula described above or stainless steel sheet weight chart.
Conclusion
The chart for the standard size of stainless steel sheet is very important for fabricators, contractors, engineers, and industrial buyers.
In order to use the proper size of the sheet, we should know the standard size, thickness, grade, finish, etc. of stainless steel sheets.
No matter if we need SS 202 sheet, SS 304 sheet or SS 316 sheet, we should make sure of the size in order to reduce the wastage, increase the efficiency of fabricating and reduce the project cost. Always double-check the size of the stainless steel sheet, the thickness of the stainless steel sheet, the finish of the stainless steel sheet and the weight of the stainless steel sheet before we place the order.
